Sort By:

Edelrid belay device - Giga Jul


A versatile standard and assisted braking device in one. For situation dependant belaying and abseiling. Weight: 121g Use with: 7.1 to 10.0mm ropes The Giga Jul is particularly light, robust and abrasion resistant due to smart hybrid construction of aluminium and steel. The main body is made from particularly light aluminum.

Edelrid Lanyard edelRider triple 40cm


Lightweight lanyard with integrated swivel. Twister Triple carabiner prevents lanyard twisting. 10mm screw link.

Edelrid belay device - OHM


Assisted-braking resistor to increase rope friction when there is a large weight difference between belayer and lead climber. In the event of a fall, the OHM increases the amount of rope friction so that a lighter belayer can hold a heavier lead climber without difficulty. Belayer requires significantly less hand braking force to arrest a fall Lowering a heavier climber is much easier to control OHM is attached at the first bolt in the safety chain Should a lead climber fall at the first bolt, the OHM significantly reduces the risk of a possible ground fall Rope handling when belaying a lead climber not affected (no additional friction when paying out rope) Recommended weight difference (lead climber > belayer): 10 - 40 kg Minimum weight belayer: 40 kg For single ropes from 8.9 - 11.0 mm Weight: 470g Comes with quickdraw and screwlink...

Edelrid belay device - Mega Jul


Edelrid's most versatile belay and abseil device made of solid stainless steel for durability. Features - For belaying a leader or bringing up 2 seconds, also suitable for abseiling - Very lightweight construction - High braking performance assists the belayer with leader falls - Small eyelet for releasing unit with a carabiner when bringing up your partner - Rope can be paid out faster to a leader by holding device in the “open” position with the thumb - Suitable for 7.8 - 10.5 mm ropes Weight: 65g

Edelrid belay device - Kilo Jul


A universal solid, multi-featured aluminium device for belaying and rappelling on all ropes from 7.8 to 10.5 mm. Feeds well when belaying the leader and can be used to independently bring up to 2 seconds at the same time when climbing in a team of three. The geometric design of the Kilo Jul gives you two braking speeds and the small eyelet allows the unit to be released with a carabiner when bringing up your partner. Weight: 80g

Edelrid descender - Bud


A classic redesigned sturdy piece of equipment. No further explanation required. For universal usage such as rappelling and belaying. Weight: 110g

Edelrid belay device - Jul 2


Innovative belay device with high braking performance for single ropes. The optimized Mega Jul geometry ensures easy and secure belaying even with thicker ropes. 87g DETAILS: Tough core material of abrasion-resistant stainless steel Optimized geometry ensures easy operation even for beginners High braking performance assists the belayer with leader falls Rope can be paid out faster to a leader by holding the device in the “open” position with the thumb Perfect handling, even for ropes with larger diameter Suitable for 8.9 –11.0 mm single ropes

Edelrid belay device - Zap-O-Mat


The Zap-O-Mat is a semi-automatic belay tool based on the tubestyle belay device. It is considered semi-automatic as the belayer does not have to touch the device to pay out rope evenly and quickly. The braking resistance of the Zap-O-Mat can be adjusted for rope size, new or old ropes, or to climbing style. When the green button is pressed in, rope can be given out faster. When the button is released, the spring in the handle is relaxed and the bolt has less resistance, increasing the braking force. The Zap-O-Mat's integrated carabiner arrest increases the braking power. The Zap-O-Mat is useful when working routes, top roping or when the climber is heavier than the belayer. The unit doesn’t have to be removed from the harness to thread the rope, increasing safety and eliminating the risk of being dropped and lost on long routes. For use with 8.9 to 10.5mm single ropes. Weight: 158g

Edelrid pulley - Turn (each)


A practical aluminium pulley with a maximum working load of 30 kN (15 kN in both directions). The Turn pulley is ideal for use in rescue systems and on tensioned rope ways. Weight: 94g

Edelrid belay device - Eddy


Since its introduction the Eddy has established a reputation as a safe and easy to use semi-automatic belay device predominantly for sport and indoor climbing. The Eddy is simple and safe, easy to thread, with the rope logically following the rope flow. A controlled descent with an emergency brake system eliminates the "panic pull“ syndrome which can lead to serious accidents. The Eddy provides maximum safety whether top roping or lead climbing with easy paying out of rope to the leader. Must be used with both hands. For use with 9.0 to 11.0mm single ropes. Weight: 360g
Image Product Name Code Manufacturer
Edelrid belay device - Giga Jul
Product Name:
Edelrid belay device - Giga Jul
Code:
ED-73742
Manufacturer:
Edelrid Lanyard edelRider triple 40cm
Product Name:
Edelrid Lanyard edelRider triple 40cm
Code:
ED-88129-040
Manufacturer:
Edelrid belay device - OHM
Product Name:
Edelrid belay device - OHM
Code:
ED-72070
Manufacturer:
Edelrid belay device - Mega Jul
Product Name:
Edelrid belay device - Mega Jul
Code:
ED-71784-000
Manufacturer:
Edelrid belay device - Kilo Jul
Product Name:
Edelrid belay device - Kilo Jul
Code:
ED-71787-000
Manufacturer:
Edelrid descender - Bud
Product Name:
Edelrid descender - Bud
Code:
ED-71762-000
Manufacturer:
Edelrid belay device - Jul 2
Product Name:
Edelrid belay device - Jul 2
Code:
ED-71832-000
Manufacturer:
Edelrid belay device - Zap-O-Mat
Product Name:
Edelrid belay device - Zap-O-Mat
Code:
ED-75215-000
Manufacturer:
Edelrid pulley - Turn (each)
Product Name:
Edelrid pulley - Turn (each)
Code:
ED-71789-000
Manufacturer:
Edelrid belay device - Eddy
Product Name:
Edelrid belay device - Eddy
Code:
ED-75214-000
Manufacturer:
Showing 1 to 10 of 10 (1 Pages)